[[ImgSrc-topCode]]
Mast Aerial Work Platform
video
Mast Aerial Work Platform

Mast Aerial Work Platform

Mast aerial work platform is an aerial work platform with outstanding work performance. Its small size allows it to enter a variety of space-constrained venues, and its 0m turning radius means free steering movement even in narrow aisles. High mobility, high sensitivity, pure battery drive, additional extension platform increases the working range. This is a man lift that is not only environmentally friendly, but also can greatly improve your work efficiency.
Küsi pakkumist
Räägime nüüd
Kirjeldus


CATHAYLIFT Mast Aerial Work Platform is a lifting height from 6m to 7.5m. Products are certified by CE, Rohs, ISO9001, And our safety test, including mechanical strength is more than ten times the test requirements, hydraulic load capacity test requirements are more than eight times, all internal electrical appliances have the European EC declaration of conformity, anti-tipping test 150% full load, 4 times the maximum tilt Angle, 200N horizontal force, load on the most unfavorable side to ensure that the equipment does not roll over.

Model No.


CR-6

CR-7.5

Max.Platform Height

mm

6000

7500

Max Working Height

mm

8000

9500

Load Capacity

mm

150Kg

125kg

occupants

mm

1

1

Overall size

mm

1400(1890)*760*1990

1400(1890)*1020*1990

Platform Size

mm

1260*700

Wheel Base

mm

1140

Max Drive Speed(Platform Stowed)

Km/h

4

Max Drive Speed(Platform Extended)

Km/h

1.1

Min Turn Radius

mm

0

UP/Down speed

/SEC

43/35SEC

48/40SEC

Driving Wheel Size

mm

Φ230X80

Battery

V/Ah

2X12VDC/100AH

Lifting motor

/

24VDC/1.3KW

Net weight

kg

1120

1356

Charger


24V/15A

24V/15A

Product Details:

● Proportional control (high sensitivity, high precision)

● Intelligent automatic brake lock

● Buzzer, Horn, Strobe light

● Extended platform with 0.49m

● Pothole protector

● Fault diagnosis system(The code is displayed in the control panel)

● Oil Pipe Explosion-Proof System

● 4 wheels×2 drive

baiduimg.jpg


Details Images:
Smart control handle:

 

Anti-misoperation design, fault code display, the machine can be controlled to move up and down on the platform, when the machine is in the state of lifting, it will automatically start the slow mode, high sensitivity, low failure rate, the red button is an emergency stop switch.

baiduimg.jpg
Main Control Panel (Ground):

 

It can be controlled on the ground. The Wie red rotary button on the panel is an emergency stop switch and a power display switch.The upper control and lower control conversion buttons and the lifting and lowering buttons.

The big red button is the power switch, and the adjacent one is the charging socket.(built-in charger)

baiduimg.jpg
Emergency hydraulic valve complete set of safety signs:


In case of emergency, the valve can be rotated and dragged to drop the platform to the ground. Complete set of warning signs.






Buzzer, warning light, tilt sensor:


When the machine is turned on, the buzzer and warning light will always be working.When the tilt sensor rises to two meters, if the angle is greater than two degrees, the machine will be in a locked state, and the intelligent operation will drop at this time to prevent the occurrence of danger.

baiduimg.jpg


Application

5

6


Real Order:

7


Kuum tags: mast aerial work platform

Küsi pakkumist

(0/10)

clearall